How to Make a Spring Clamp Rack
November 15, 2013
This spring clamp rack is a simple, but effective little project. I just grabbed a scrap of 2×4 and some leftover 1″ dowel I had laying around the shop. I started by cutting a scrap piece of 2×4 down to roughly 10″ and drilled 2 holes in it for the dowels to go (Depending on how many spring clamps you have, you may want to cut the 2×4 longer and drill more holes for dowels). Once that’s done, add some wood glue to hold the dowels in place and your clamp rack is all set to go.
You can email directly at firstname.lastname@example.org
Visit the About Page to see Frequently Asked Questions
Filling out the form is the fastest way to get in touch with me