How to Make a Keurig Pod Holder

May 30, 2017


With last weeks project cutting so much into this week, I only had a couple of days to build a project/make a video. For this project, I started by creating a template for the cup and once I had it made, I printed it out and attached it to a 1/2″ piece of plywood. I used a bandsaw/jigsaw to cut out the template and drilled out the holes with a 1 5/8″ forstner bit. Then I cut a 3/4″ piece of wood for the base to 5.25″x3.5″ and beveled one of the 5.25″ ends to 80°. Then I gave all of my pieces a quick sanding and glued them together with wood glue. Once it was dry, I applied a few coats of black spray paint to give it a clean looking finish. It’s nice to do a simple project every now and then, especially after making a huge one (like last week). As always, if you’d like to make this project yourself, there is a free template available!


You can email directly at


Visit the About Page to see Frequently Asked Questions

Contact Me

Filling out the form is the fastest way to get in touch with me

1 + 14 =