How to Make a Spring Clamp Rack

Description:

This spring clamp rack is a simple, but effective little project. I just grabbed a scrap of 2×4 and some leftover 1″ dowel I had laying around the shop. I started by cutting a scrap piece of 2×4 down to roughly 10″ and drilled 2 holes in it for the dowels to go (Depending on how many spring clamps you have, you may want to cut the 2×4 longer and drill more holes for dowels). Once that’s done, add some wood glue to hold the dowels in place and your clamp rack is all set to go.